• Displacements from 0.16 cm3/rev to 2.28 cm3/rev
• Maximum pressures upto 210 bar
• Rotation speeds upto 7500 rpm

Options Available: 

• Viton 

• Displacements from 0.91 cm3/rev to 9.88 cm3/rev
• Maximum pressures upto 210 bar
• Rotation speeds upto 6500 rpm

Options Available: 

• Viton 

• Displacements from 4.2 cm3/rev to 39.6 cm3/rev
• Maximum pressures upto 210 bar
• Rotation speeds upto 2500 rpm

Options Available: 

• Viton 

• Displacements from 14.89 cm3/rev to 86.87 cm3/rev
• Maximum pressures upto 300 bar
• Rotation speeds upto 2500 rpm

Options Available: 

• Viton 

• Displacements from 0.91 cm3/rev to 9.88 cm3/rev
• Maximum pressures upto 250 bar
• Rotation speeds upto 6500 rpm

It has two configurations, MVAor MVE

• MVA- standard flow divider 
• MVE - flow divider with command connection (upto 50l/min) 

Which includes

• Pressure relief valve
• Flow rate valve and unidirectional flow rate adjustment to lead the reunification phase.

Displacements from 0.16cm3/rev to2.28 cm3/rev Maximum pressures upto280 bar Rotationspeeds upto 9000 rpm OptionsAvailable: Viton Maximum pressure valve Inlet andoutlet in the body, front flangeorback cover Available shafts:Parallel shaftwithkey, Milledshaft

• Displacements from 0.91 cm3/rev to9.88 cm3/rev
• Maximum pressures upto 300 bar
• Rotation speeds upto 6000 rpm

Options Available: 

• Viton 
• Maximum pressure valve 
• Anti-cavitation valve 
• Inlet and outlet in the body,front flange or back cover 
• Available shafts: Milled shaft, Splined shaft 

• Displacements from 4.2 cm3/rev to 39.6 cm3/rev
• Maximum pressures upto 300 bar
• Rotation speeds upto 3500 rpm

Options Available: 

• Viton 
• Maximum pressure valve 
• Anti-cavitation valve 
• Inlet and outlet in the body,front flange or back cover 
• Available shafts: Milled shaft, Splined shaft 

• Displacements from 14.89 cm3/rev to 86.87 cm3/rev
• Maximum pressures upto 320 bar
• Rotation speeds upto 3000 rpm

Options Available: 

• Viton 
• Maximum pressure valve 
• Anti-cavitation valve 
• Inlet and outlet in the body,front flange or back cover 
• Available shafts: Milled shaft, Splined shaft